volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Repairing intake manifold flap > < Rules for cleanliness

Polo Mk3

Fitting locations overview
Fitting locations overview
Components A to D are not shown in the illustration.
A - Brake pedal switch -F47- (in footwell on brake pedal)
B - Brake light switch -F- (in footwell on brake pedal)
C - Accelerator position sender -G79- (in footwell on accelerator pedal)
D - Clutch pedal switch -F36- (in footwell on clutch pedal)
   
1 - Fuel filter
2 - Air mass meter -G70-
3 - Exhaust gas recirculation valve
q   With intake manifold flap
4 - Diesel direct injection system control unit -J248-
q   With altitude sender -F96-.
q   Renewing → Chapter.
5 - Variable intake manifold flap change-over valve -N239-
6 - Exhaust gas recirculation valve -N18-
7 - Charge pressure control solenoid valve -N75-
8 - Coolant temperature sender -G62-
9 - Connector
q   For: 
t  Unit injector solenoid valve, No. 1 cyl. -N240-
t  Unit injector solenoid valve, No. 2 cyl. -N241-
t  Unit injector solenoid valve, No. 3 cyl. -N242-
10 - Fuel temperature sender -G81-
11 - Engine speed sender -G28-
12 - Connector
q   For Hall sender -G40-, for camshaft position
13 - Connector
q   For engine speed sender -G28-
14 - Hall sender -G40-
q   For camshaft position
15 - Intake manifold pressure sender -G71- with intake manifold temperature sender -G72-

   

Repairing intake manifold flap > < Rules for cleanliness