Volkswagen Workshop Service and Repair Manuals > Polo Mk3 > Power unit | 3-cylinder diesel engine | Self diagnosis, V.A.G Inspection Service | Measured value blocks | Measured values at full throttle | Display group 008 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)

Evaluation: Injected quantity (driver's requirement) display > < Display group 004 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)

Display group 008 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)

Display group 008 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)

Note

t	When testing, accelerate the vehicle at full throttle.

t	The measured values must be printed out or read (2nd person required) when the revolutions reach 3000 rpm.

Display group 008 -quantity limitation-
Read measured value block 8			→	Appears on display
xxxx rpm	xx.x mg/H	xx.x mg/H	xx.x mg/H
1	2	3	4	Display zones	Specification	Evaluation
				Injected quantity limitation due to air mass drawn in (smoke prevention)	46…55 mg/H	→ Chapter
			Injected quantity limitation via revs. (torque limitation)		43…48 mg/H	→ Chapter
		Quantity injected (driver's requirements)			60…69 mg/H	→ Chapter
	Engine speed				2800...3200 rpm	---

Power unit
3-cylinder diesel engine
Self diagnosis, V.A.G Inspection Service
Measured value blocks / asured_values_at_full_throttle/">Measured values at full throttle
Display group 008 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)

Evaluation: Injected quantity (driver's requirement) display > < Display group 004 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C)