Polo Mk3
Servicing valve gear
Removing and installing cylinder head cover and camshaft
|
Special tools, workshop equipment, testers, measuring instruments and auxiliary items required
|
Removing Notes:
Work sequence
|
|
|
Note: The sealant must not be applied too thick, otherwise excess sealant can enter the oil channels or camshaft bearing and cause damage to the engine. |
Notes:
|
Note: Sealant must be left dry for approx. 30 minutes after installing cylinder head cover.
The rest of the assembly is basically a reverse of the dismantling sequence. Installing toothed belt and adjusting timing => Page 15-8 . |