Polo Mk3
Thermostat side, engine codes ADX, AEA, AEV |
1 - | Self-tapping bolt |
2 - | Connection |
3 - | O-ring |
q | Renew |
4 - | Thermostat |
q | Checking: Heat up thermostat in water |
q | Opening begins at approx. 84 °C. |
q | Ends at approx. 98 °C |
q | Opening lift min. 7 mm |
q | Installation position → Chapter |
5 - | To expansion tank |
q | → Item |
6 - | From expansion tank |
q | → Item |
7 - | To heat exchanger |
8 - | From heat exchanger |
9 - | Seal |
q | Renew |
10 - | Coolant pipe |
11 - | Retaining clip |
12 - | Thermostat housing |
13 - | 10 Nm |
14 - | Coolant temperature sender -G62- |
q | With coolant temperature display sender -G2-. |
15 - | Plug |
16 - | To top of radiator |
q | → Item |
17 - | From bottom of radiator |
q | → Item |