volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing camshaft

Polo Mk3

Removing
Removing
–  First remove toothed belt → Chapter.
–  Turn crankshaft back slightly.
–  Remove camshaft pulley. When loosening camshaft toothed belt pulley bolt, hold with counterhold tool -3036-.
–  Remove rear toothed belt guard.
–  Remove cylinder head cover.
–  Remove ignition distributor.
   
–  First remove bearing caps 5, 1 and 3.
–  Loosen bearing caps 2 and 4 alternately and diagonally.
  V15-0676

Installing > < Removing and installing camshaft