| –
| Position marking -arrow A- of inner rotor of oil pump at installation position marking -arrow B- on oil pump housing cover. |
| –
| Coat the four crankshaft follower polygon cams with oil. |
| –
| Lightly oil sealing lip of oil pump oil seal. |
| –
| Guide oil pump carefully onto crankshaft follower polygon cams. |
| –
| Align inner rotor to crankshaft follower polygon cams by turning slightly if necessary. |
| –
| Then slide oil pump carefully onto dowel sleeves. |
| –
| Remove assembly tool -T10022-. |
| –
| Install suction line → Item. |
| –
| Install toothed belt pulley and belt tensioner, install toothed belt and tension → Chapter, Removing, installing and tensioning toothed belt. |
|
|
|
