Polo Mk3
General to self-diagnosis
Connecting fault reader V.A.G 1551 and selecting engine electronics control unit
|
All functions of V.A.G 1551/1552 can also be carried out with the new tester V.A.S 5051. Connecting VAS 5051 .
|
Test conditions
Work sequence |
After the fault reader has been connected:
Notes:
=> Current flow diagrams, Electrical fault finding and Fitting locations
=> Fault reader operating instructions
|
→ Indicated on display: |
|
|||
* Appears alternately
|
→ The control unit identification and the coding will appear on the display, e.g.: |
|
||
Note: Replace control unit if the control version displayed does not correspond to the vehicle => Page 24-117 . An incorrectly coded engine control unit leads to:
|
→ Indicated on display: |
|
||
|