Volkswagen Workshop Service and Repair Manuals > Polo Mk3 > Power unit | Direct injection and glow plug system with distributor pump as of 10.99 | Self diagnosis, V.A.G Inspection Service | Measured value blocks | Evaluating measured value blocks | Evaluation: Display group 7, display zone 3

Evaluation: Display group 7, display zone 3 - intake manifold temperature

Display fault reader -V.A.G 1551-

Possible fault cause

Fault elimination

approx. 136.8 °C

t	Defective intake manifold temperature sender -G72-

–	Check intake manifold temperature sender -G72- → Chapter

–	If a fault is present the measured value block indicates a constant intake manifold temperature of approx.136.8°C

Volkswagen Workshop Service and Repair Manuals