volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Display group 010 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C) > < Evaluation: Display group 8, display zone 3 - quantity injected limitation via engine speed (torque limitation)

Polo Mk3

Evaluation: Display group 8, display zone 4 - quantity injected limitation due to intake air mass (avoidance of smoke)
   
Evaluation: Display group 8, display zone 4 - quantity injected limitation due to intake air mass (avoidance of smoke)
Display fault reader -V.A.G 1551-Possible fault causeFault elimination
Below specification
t  Air mass drawn in insufficient
t  Defective variable intake manifold flap change-over valve -N239-
–  Checking variable intake manifold flap change-over valve -N239- → Chapter, Final control diagnosis
 
t  Exhaust recirculation quantity too high
t  Exhaust gas recirculation valve -N18- defective
–  Check exhaust gas recirculation valve -N18- → Chapter, final control diagnosis

   

Display group 010 at full throttle (road test in 3rd gear, coolant temperature not below 80 °C) > < Evaluation: Display group 8, display zone 3 - quantity injected limitation via engine speed (torque limitation)