Volkswagen Workshop Service and Repair Manuals

Special tools, testers and auxiliary items

• ◆ Ignition tester V.A.G 1767 or V.A.G 1367 with HT pick-up clamp V.A.G 1367/8

Check conditions

• ● No faults stored in fault memory
  , interrogating fault memory
• ● Engine oil temperature min. 80 °C

Test sequence

• ‒ → Connect ignition tester V.A.G 1767 or ignition tester V.A.G 1367 with HT pick-up clamp V.A.G 1367/8.
• ‒ Start engine and run at idling speed.
• ‒ Set ignition tester to 3000 rpm.
• ‒ Slowly increase speed to slightly above 3000 rpm until the ignition timing (advance figure) is indicated.
       Specification:
       Engine code ADX: 33...39 ° before TDC
       Engine code AEA: 30...36 °before TDC
       Engine code AEV: 39...45 °before TDC