Volkswagen Workshop Service and Repair Manuals

Note:

Motronic control unit (J220)* with connectors

, item 4 .

• Connector
• ◆ Black, 4 pin
• ◆ For ignition transformer (N152)
• Ignition transformer (N152)*
• ◆ Fitting location => Page 24-1 , engine compartment overview
• ◆ Checking => Page 28-13
• ◆ With marking for ignition cables:
  A = Cylinder 1
  B = Cylinder 3
  C = Cylinder 2
  D = Cylinder 4
• 10 Nm

• Connector
• ◆ Black, 2-pin
• ◆ For knock sensor 1 (G61)
• ◆ Sensor and connector contacts are gold-plated
• Knock sensor 1 (G61)*
• ◆ Fitting location => Page 24-1 , engine compartment overview
• ◆ Checking => Page 28-20
• ◆ Sensor and connector contacts are gold-plated
• 20 Nm
• ◆ Tightening torque influences the function of the knock sensor
• Connector
• ◆ Black, 3-pin
• ◆ Hall sender (G40)

• Hall sender (G40)*
• ◆ Fitting location => Page 24-1 , engine compartment overview
• ◆ Checking => Page 28-10
• O-ring
• ◆ Renew if damaged
• Spark plug, 30 Nm
• ◆ Remove and install with spark plug spanner 3122B
• ◆ Type and electrode gap
  => Page 28-8 , test data, spark plugs
• Bracket
• ◆ For ignition transformer (N152)
• H.T. cable
• ◆ With suppression connector and spark plug connector
• ◆ Resistance 4.8...7.2 kω