Servicing injection system
Checking intake air temperature sender
Special tools, testers, measuring instruments and auxiliary items required
-
◆ Fault reader V.A.G 1551 or vehicle system tester V.A.G 1552 with cable V.A.G 1551/3
-
◆ Test box V.A.G 1598/18
-
◆ Hand multimeter V.A.G 1526 or multimeter V.A.G 1715
-
◆ Adapter set V.A.G 1594
-
◆ Current flow diagram
-
◆ Chilling spray (commercially available)
Note:
If sender or connecting wiring is defective the control unit operates with a substitute temperature of 20 °C.
Test sequence
-
‒ Connect the fault reader V.A.G 1551 (V.A.G 1552). Then switch ignition on and select engine control unit with the "Address word" 01.
(Connecting fault reader and selecting engine control unit
.)
|