Performing self diagnosis
Test prerequisites for self-diagnosis
-
● The tyres fitted to all wheels must be of the same (approved) size; tyres inflated to prescribed pressure.
-
● Mechanical/hydraulic parts of the brake system including brake light switch and brake lights OK.
-
● Hydraulic pipes and connections not leaking (visual check of hydraulic unit, brake calipers, wheel cylinders, tandem master brake cylinder).
-
● Wheel bearings and wheel bearing play OK.
-
● Control unit -J104- is correctly bolted to hydraulic unit -N55.
-
● Connector on control unit -J104- correctly plugged-in (retainer is engaged).
-
● Check contacts of ABS components for damage and correct seating.
-
● All fuses according to current flow diagram OK (remove fuse from fuse holder to check).
-
● Supply voltage OK (at least 10.0 V).
|