| –
| Release connector -1- and pull off twin-filament bulb. |
| –
| Unclip retaining clip -2- over retaining lugs -3- and swing clip downwards. |
| –
| Pull twin-filament bulb -5- out of reflector. |
| Installation is carried out in the reverse order. When installing observe the following: |
Note | Do not touch glass envelope when fitting a new bulb. Fingers leave traces of grease on the glass envelope, which evaporate when the bulb is switched on and cause the glass envelope to cloud over. |
| –
| Insert new bulb so that the lugs on the disc plate align with the recesses in the reflector. |
| –
| Check function of headlight. |
| –
| Check headlight settings and adjust if necessary → Booklet28. |
|
|
|
