Polo Mk3
| 4-cylinder fuel injection engine with basic belt drive, vehicles 05.99 ► |
| 1 - | Hexagon bolts |
| q | M10×50 mm |
| q | 45 Nm |
| q | With aluminium block: renew bolts (coated with sealant) |
| 2 - | Cross-head screw |
| 3 - | Protective cap |
| 4 - | Hexagon nut |
| q | M8 |
| 5 - | Hexagon nut |
| q | M8 |
| 6 - | Cross-head screws |
| 7 - | Voltage regulator |
| q | Checking carbon brushes → Chapter |
| q | Removing and installing → Chapter |
| 8 - | Alternator |
| q | Prescribed torque for battery positive wire → Chapter |
| 9 - | Poly V-belt |
| q | Removing and installing → Chapter |
| q | Poly V-belt drive → Fig. |
| 10 - | Tensioning arm |
| q | Observe tightening sequence → Chapter |
| 11 - | Hexagon bolt |
| q | M8×22 mm |
| q | 25 Nm |
| q | With aluminium block: renew bolt (coated with sealant) |
| 12 - | Hexagon bolt |
| q | M8×39 mm |
| q | 25 Nm |
| 13 - | Hexagon bolt |
| q | M8×85 mm |
| q | 25 Nm |
| q | Observe tightening sequence → Chapter |
| 14 - | Bracket |
