t
| Battery tester with printer -VAS 6161- |
WARNING It is not permissible to test or charge batteries whose colour indicator is light yellow. Do not slave/jump start the vehicle! |
Danger of explosion when checking and charging or slave/jump starting. |
These batteries must be renewed. |
|
–
| Switch off ignition and all electrical consumers. |
–
| Check the colour indicator in batteries with an inspection window → Chapter. |
–
| Connect red terminal „+“ of tester to positive terminal. |
–
| Connect black terminal „-“ of tester to negative terminal. |
Note Ensure test clamps have a good contact! |
–
| Select one of the following functions. |
t
| Warranty test for batteries during the warranty period → Chapter . |
t
| Maintenance test (only in new vehicles before registration, in stationary and stock maintenance programme → Chapter) |
t
| Service test for batteries no longer covered under warranty and third-party batteries → Chapter |
Note t
| The test is completed after about 10 seconds. |
t
| The result of the test is printed out by the printer. |
t
| The tester requires no cooling phase before it is ready for the next measurement. |
|
|
|