volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
General notes concerning repairs to vehicle electrical system > < Hot air blower, 220 V / 50 HzVAS 1978/14

Polo Mk3

Crimping pliersVAS 1978/1A
Crimping pliers -VAS 1978/1A-
   
Crimping pliers -VAS 1978/1A- or crimping pliers (base tool) -VAS 1978/1-2- together with head adapter 0.35 - 2.5 mm² -VAS 1978/1-1- or head adapter 4.0 - 6.0 mm² -VAS 1978/2A- are used to squeeze together crimp connectors from the wiring harness repair sets.
Crimping connectors using crimping pliers -VAS 1978/1A- → Chapter.
The following heads adapters are available for crimping pliers (base tool) -VAS 1978/1-2-:
t  Head adapter 0.35 mm2 - 2.5 mm2 -VAS 1978/1-1-
t  Head adapter 4.0 mm2 - 6.0 mm2 -VAS 1978/2A-
t  Head adapter for JPT contacts -VAS 1978/9-1-
In conjunction with head adapter for JPT contacts -VAS 1978/9-1-, the crimping pliers are used to crimp contacts to single wires during repairs to wiring with cross sections up to 0.35 mm2 → Chapter.
Interchanging head adapter:
–  Open up the crimping pliers fully.
  N97-10491
–  Unclip both locking pins -arrows- from the body of the crimping pliers.
  N97-10201
–  Insert the required head adapter from above -arrow- in the body of the crimping pliers.
  N97-10202
–  Lock the head adapter by engaging the pins -arrows- in the body of the crimping pliers.
  N97-10203

General notes concerning repairs to vehicle electrical system > < Hot air blower, 220 V / 50 HzVAS 1978/14