volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Radio/Navigations System (RNS) with multi-function display (MFD) > < Removing and installing loudspeaker, vehicles >09.99
Radio, telephone, navigation
Loudspeaker system
Removing and installing loudspeaker, vehicles 10.99 >

Front treble loudspeaker

The domed treble loudspeakers in the front doors is permanently attached to the exterior mirror triangular cover.

Removing:

The door trim must be removed first to enable a loudspeaker to be renewed.

 
N91-0141
  • ‒ → Remove bolt -A-.
  • ‒ Pull triangular cover off door from upper edge.
  • ‒ Slide mirror triangular cover carefully upwards.
  • ‒ Pull off connector.

Installing:

Installation is carried out in the reverse sequence!

Rear treble loudspeaker

The domed treble loudspeakers in the rear door are permanently attached to the door opener (release) cover.

The door trim must be removed first and then the door opener (release) to enable a loudspeaker to be renewed.

 
N91-0232

Removing:

  • ‒ Remove door trim.
  • ‒ Disconnect cable connector to loudspeaker.
  • ‒ → Remove door opener cover securing bolts -arrows- and take door opener cover out of door trim.

Installing:

Installation is carried out in the reverse sequence!

Front and rear bass loudspeaker

Removing:

 
N91-0102

The door trim must be removed first to enable a loudspeaker to be removed.

  • ‒ → Remove 4 screws on loudspeaker.
  • ‒ Take out loudspeaker.
  • ‒ Pull off connector.

Installing:

  • ‒ Observe installation marks (guide pins) on loudspeaker.

Installation is carried out in the reverse sequence!

Radio/Navigations System (RNS) with multi-function display (MFD) > < Removing and installing loudspeaker, vehicles >09.99