volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Read measured value block > < Final control diagnosis

Polo Mk3

Radio, telephone, navigation
Radio/Navigation system self-diagnosis (RNS)
Coding radio functions

The following radio functions can be coded:

  • ◆ Sound adaption
  • ◆ Number of loudspeakers
  • ◆ Sound system
  • ◆ Type of aerial

Breakdown of code number:

06

Code number for sound synchronisation

4

Code number for number of loudspeakers

0

Code number for sound system

3

Code number for CD changer and type of aerial

Performing coding

  • ‒ Press keys 0 and 7.
  • ‒ Confirm entry with key Q.
 
→ Indicated on display:
Coding control unit
Enter code number XXXXX     (0-32000)
  • ‒ Enter code number compiled from code table

    • Code table:

    Code number

    Setting for tuning sound

    Code number for basic settings

    Code No. for number of loudspeakers

    Code number for sound system

    Code number for configuring radio

    1st+2nd

    3rd

    4th

    5th

    Position

    06

    Sound tuning for Polo

    2
    4

    2 passive loudspeakers, front
    4 passive loudspeakers

    0
    2

    No sound system
    With sound system (DSP)

    1
    3

    Radio with active aerial
    Radio with CD changer and active aerial
       
      → Indicated on display, e.g.:
      Coding control unit     Q
      Enter code number 06403     (0-32000)
    • ‒ Confirm entry with key Q.
      		•
       
      → Indicated on display:
      1J0035152 D     Radio     0001 ⇒
      Coding     06403     WSC     00000
      • ‒ Press ⇒ key.
       
      → Indicated on display:
      Rapid data transfer     HELP
      Select function XX

      Read fault memory after completing the coding =>Page 01-125 .

      Ending function:

      • ‒ Press keys 0 and 6. (The function "End output" is selected with 06.)
      • ‒ End coding with ⇒key.
       
      → Indicated on display:
      Rapid data transfer     Q
      06 End output
      • ‒ Confirm entry with key Q.
       
      → Indicated on display:
      Rapid data transfer     Help
      Enter address word XX

      The tester is again in basic function.

      Read measured value block > < Final control diagnosis