Polo Mk4
Front panel (2007 ►) - assembly overview |
1 - | Front panel with assembly components |
q | work position → Chapter |
q | remove and install → Chapter |
q |
2 - | Screw |
q | 2 units |
q | 8.5 Nm |
q | When installing, apply to the thread anaerobic adhesive -D 000 600 A2- or low-viscosity locking adhesive → Chemical Materials Manual |
3 - | Bonnet latch operating cable |
4 - | Wing fastening hole |
5 - | Radiator and condenser |
q | Do not leave the condenser sustained by the ducts. |
q | The condenser ducts cannot be bent. |
6 - | Front protector support |
7 - | Screw |
q | 4 units |
q | 8.5 Nm |
8 - | Screw |
q | 6 units |
q | 30 Nm |
9 - | Guide Pins -3411- |