Polo Mk4
| Front protector (► 06.06) - assembly overview |
| 1 - | Front protector |
| q | PP/EPDM material |
| q | remove and install → Chapter |
| 2 - | Screw |
| q | 3 units |
| q | 8 Nm |
| 3 - | Screw |
| q | 3 units |
| q | 1.5 Nm |
| 4 - | Expansion nut |
| q | 3 units |
| 5 - | Side support |
| q | To remove and install, move the bumper parallel to the support (on the left and right sides). |
| 6 - | Screw |
| q | 4 units |
| q | 2 Nm |
| 7 - | Quick nut |
| q | 4 units |
| 8 - | Expansion rivet |
| q | 4 units |
| 9 - | Bumper trim |
| q | fitted to the front protector |
| 10 - | Air intake grille |
| q | PP/EPDM material |
| q | fitted to the front protector |
| 11 - | Air intake grille with cut to the fog light |
| q | PP/EPDM material |
| q | fitted to the front protector |
| 12 - | Screw |
| q | 2 units |
| q | 8 Nm |
| 13 - | Headlight washer cover |
| q | The cover is fitted to the cut for the headlight washer ejectors. |
