Polo Mk4
| Protector support - assembly overview |
| 1 - | Protector support |
| 2 - | Screw |
| q | 4 units |
| q | 1.5 Nm |
| 3 - | Central guide |
| 4 - | Side guide |
| q | To remove and install, move the rear protector, parallel to the side guides (on the left and right sides). |
| 5 - | Screw |
| q | 4 units |
| q | 1.5 Nm |
| 6 - | Expansion bushing |
| q | 6 units |
| 7 - | Expansion bushing |
| q | 2 units |
| 8 - | Riveted nut |
| q | 4 units |
| q | To install, use the riveted nut applicator POP NUT -VAG 1765B- or riveted nut applicator POP NUT -EQ 7422- |
| 9 - | Screw |
| q | 1.5 Nm |
| q | 4 units |
| 10 - | Support |
| 11 - | Screw |
| q | 2 units |
| q | 8 Nm |
| 12 - | Hexagonal nut M8 |
| q | 6 units |
| q | 20 Nm |
