volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Minimum adhesive curing time > < Preparing the body for application of adhesive

Polo Mk4

Installation instructions
Installation instructions
The surfaces where the Primer is to be applied should be free from residues/dirt.
–  Remove the adhesive remains with the adhesive remover -D 002 000 10-.
–  Moisten a cloth with the silicone remover -LSE 020 100 A3-.
–  Thoroughly clean the adhesive application area with the solvent-moistened cloth.
   
–  Apply Primer homogeneously with the applicator - D 009 500 25-.
t  The drying time is of approximately 10 minutes.
  R66-0019
–  Apply the adhesive under the Primer application.
  WARNING
The spoiler must be installed, at the most, 10 minutes after applying the Primer. Otherwise, the adherence will be impaired.
t  The openings must be at least 1 mm.
t  During the curing period, fasten the spoiler with masking tape.
  R66-0020

Minimum adhesive curing time > < Preparing the body for application of adhesive