Polo Mk4
Assembly overview |
1 - | Rear spoiler |
q | Remove → Chapter |
q | Install → Chapter |
q | Material: PU-R-RIM |
2 - | Lower PUR adhesive cord |
q | On lower side of spoiler |
q | Preparation of rear lid for gluing |
q | Preparation of rear spoiler for gluing |
q | Adhesive cord: width = 3 mm, height = 3 mm |
3 - | PUR adhesive cord |
q | Preparation of rear lid for gluing |
q | Preparation of rear spoiler for gluing |
q | Adhesive cord: width = 3 mm, height = 3 mm |
4 - | Primer application area |
q | Application of body primer - D 009 600- |
5 - | Harness connector for auxiliary brake light |
q | → Electrical equipment; Rep. Gr.94 |
6 - | Auxiliary break light |
q | To remove it, remove spoiler. |