Polo Mk4
| External door handle and lock - assembly overview |
| 1 - | Door latch |
| q | The door lock can only be removed along with the support → Item. |
| q | remove and install → Chapter |
| 2 - | Cable |
| q | lock unlocking |
| 3 - | Support |
| q | Fitted and riveted to the door lock. |
| q | It is not supplied along with the door lock. |
| 4 - | Support |
| q | remove: |
| q | Remove the latch cylinder → Chapter. |
| q | Remove the door handle → Chapter. |
| q | Remove the support. |
| q | Remove the Philips screw → Item, push the support slightly backwards and remove from the door. |
| 5 - | Screw |
| 6 - | Wrench |
| q | replace batteries → Chapter |
| q | adapt the new or additional keys to the vehicle's remote command and immobiliser → Chapter |
| 7 - | External door handle |
| q | remove and install |
| 8 - | Cover cap |
| 9 - | Latch cylinder |
| q | remove and install → Chapter |
| 10 - | Base |
| 11 - | Torx screw |
| q | The pincers -T 10072- is used to remove. |
| q | When removing the screws, the lock cylinder → Item is unblocked and can be removed from the support → Item |
| q | The screw → Item cannot be threaded without the lock cylinder inserted. The locking ring may fall into the door. |
