| Activating the automatic closing and opening |
Note | After the vehicle battery is turned off then turned on again, the automatic driver and passenger window closing and opening function is deactivated. |
| To reactivate this function after the battery is turned on, follow the procedure below: |
| –
| Lock the vehicle from outside, through the driver's or passenger's door. |
| Here, it is necessary that all doors and windows are completely closed. |
| –
| Unlock the vehicle and lock it again through the driver's or passenger's door. For this purpose, leave the key for at least one second in the closing position. |
| The automatic driver's and passenger's window closing and opening function is activated again. |
| If there is an abnormality in the power window drive mechanism, it will be indicated by the blinking of the switch lights, on the driver's and passenger's door and on the rear passenger doors. |
| The lights, located in the door linings, blink for about 15 seconds after the ignition is turned on. |
|
|
|
