Volkswagen Workshop Service and Repair Manuals > Polo Mk4 > Body | General body repairs, interior | Passenger protection | safety belts | Safety belt without pre-tensioner

Installation

The installation occurs in the reversal sequence of removal, observing the following instructions:

–	Screw on the fastening screw -7- with torque of (40 Nm).

–	Screw on the fastening screw -4- with torque of (8 Nm).

–	Install the belt positioning device (for different versions) -6- and tighten its respective screws to (3.5 Nm).

–	Screw on the fastening screw -2- with torque of (40 Nm).

–	Install the lower fastening point of the safety belt and tighten fastening screw -8- to (40 Nm) → Chapter.

Volkswagen Workshop Service and Repair Manuals