Volkswagen Workshop Service and Repair Manuals

Gear selector mechanism - adjust Special tools and workshop equipment required

t  Positioner -T10027- For a proper fit, watch the following conditions: l  Moving parts of selector mechanism and transmission elements must be in proper condition. l  Selector mechanism must move freely. l  The gearbox, clutch and clutch mechanism must also be in proper condition. l  Gearbox in neutral position.

–  Secure locking mechanism on gear selector cable and gate selector cable by pulling forwards in direction of arrow 1 onto stop and then turn to left in direction of arrow 2 to lock.

Set selector shaft as follows: –  Press selector shaft down in direction of arrow 1. –  Turn right-angle piece -A- in direction of arrow 2 when pressing selector shaft down –  Remove gaiter to selector lever of centre console

Set selector lever as follows: –  Select neutral with selector lever. –  Then guide Positioner -T10027- through hole-A- and into hole -B-.

–  Now turn locking mechanism on gear selector cable and gate selector cable to right onto stop (direction of arrow). The spring will press the locking mechanism into normal position.

–  Turn right angled piece -A- back to original position (direction of arrow).

–  Remove Positioner -T10027- of holes -A- and -B-. –  Press cover with frame into console.