volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Gearbox - dismantle and assemble > < Tightening torque

Polo Mk4

Gearbox oil - check
Gearbox oil - check
Gearbox oil specification → Chapter.
–  Remove insulation tray below engine/gearbox, if fitted.
   
–  Remove plug -arrow- to check oil.
The oil level is correct when the gearbox is full to the lower edge of the filler hole.
–  Install plug -arrow-.
When filling with new oil, note following
–  Remove plug -arrow-.
–  Top up gearbox oil to lower edge of filler hole.
–  Install plug -arrow-.
–  Start engine, engage gear and allow gearbox to turn for approx. 2 minutes.
–  Switch off engine and remove plug -arrow-.
–  Top up gearbox oil to lower edge of filler hole.
–  Install bolt -arrow- and tighten to 25 Nm.
  V39-1959

Gearbox - dismantle and assemble > < Tightening torque