Volkswagen Workshop Service and Repair Manuals > Polo Mk4 > Engine | 4 - Cyl. injection engine | Engine cylinder head, valve gear | Engine cylinder head - remove and install | Timing belt - remove and install, adjust

Adjust distribution times

Note

When turning the camshaft, the crankshaft should not place any cylinder in the TDC position. Risk of damages to the valves/pistons.

–	Align the existing mark on the camshaft gear with that on the mechanical distribution cover.

–	Place the vibration absorber at cylinder 1 TDC -arrows-.

–	Install the timing belt on the tensioning pulley and camshaft gear.

Volkswagen Workshop Service and Repair Manuals