volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Fuel level indicator sensor G - remove and install > < Fuel pump (pre-supply pump) G6 - remove and install|Removal

Polo Mk4

Installation
Installation
–  Installation of the Fuel pump (pre-supply pump) -G6- is carried out in the reverse sequence of removal.
  Note
t  When installing the Fuel pump (pre-supply pump) -G6-, ensure that the Fuel level indicator sensor -G- is not damaged.
t  The new sealing ring of the Fuel pump (pre-supply pump) -G6- must be installed in the fuel reservoir opening without lubrication.
t  Only when installing the Fuel pump (pre-supply pump) -G6-, the new sealing ring must be lubricated with fuel.
   
t  Observe installation position of the Fuel pump (pre-supply pump) -G6-. The marking on the Fuel pump (pre-supply pump) -G6- must match the marking on the fuel tank -arrows-.
t  Make sure the fuel hoses are firmly fastened.
t  Do not invert the supply and return hoses -1 and 2-.
t  After installing theFuel pump (pre-supply pump) -G6-, check whether the input, return and vent hoses are still fastened to the fuel reservoir.
  A20-0096

Fuel level indicator sensor G - remove and install > < Fuel pump (pre-supply pump) G6 - remove and install|Removal