Polo Mk4
Intake manifold (lower part) - disassemble and assemble |
1 - | Fuel distributor with injection valves |
q | Remove and install → Chapter. |
2 - | 8 Nm |
3 - | Cable block |
4 - | To the intake manifold (upper part) |
q | → Item. |
5 - | Sealing ring |
q | Pay attention on the installation position. |
q | Replace when damaged. |
6 - | 20 Nm |
7 - | Support |
8 - | 20 Nm |
9 - | Sealing ring |
q | Replace when damaged. |
10 - | Intake manifold (lower part) |