General instructions regarding the injection system |
t
| The Engine control unit -J623- is
equipped with a self-diagnosis system. Before carrying out repairs,
and for troubleshooting, refer to the event memory. Likewise, check
vacuum lines and connections (air infiltration). |
t
| The fuel hoses in the engine compartment must only be secured
with spring clamps. Using retaining clamps or screwed clamps is not
allowed. |
t
| A minimum voltage of 11.5V is necessary for the perfect operation
of electrical components. |
t
| Do not use silicone-based sealants. Silicone residues sucked
in by the engine do not burn and may damage the Lambda Probe -G39-. |
|
|
|