volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Oil pressure and oil pressure switch - check > < Oil pump - remove and install|Installation

Polo Mk4

Operation sequence
Operation sequence
   
–  Place Allen bolt of installing device 3083 with Assembly tool -T10022- on crank shaft and tighten manually.
–  Place new sealing joints on guides -A-.
  N17-0075
–  Place marking -arrow--A- of oil pump internal rotor on installation position-marking -arrow--B- of oil pump body cover.
–  Apply oil to the four sliding polygonal cames on crank shaft.
–  Carefully place oil pump onto the four sliding polygonal cames on crank shaft.
–  Align internal rotor turning a little on the four sliding polygonal cames on crank shaft.
–  Next, carefully place oil pump onto the guides.
–  Screw oil pump. Tightening torque: 10 Nm
–  Remove installation Assembly tool -T10022-.
–  Install oil sucking tube → Item and → Item.
–  Install oil carter → Chapter.
Installing the indented belt and adjust command times → Chapter.
  N17-0074

Oil pressure and oil pressure switch - check > < Oil pump - remove and install|Installation