Polo Mk4
Injector-equipped fuel distributor - remove and install |
1 - | Fuel distributor |
q | Remove and install, check blast format and leak-proof capability. |
q | Check fuel pressure regulator → Chapter, Check fuel pressure, fuel pressure regulator and retaining pressure. |
2 - | 10Nm |
3 - | Fastener |
q | Ensure proper fastening. |
q | Ensure correct installation on injector and fuel distributor |
4 - | Sealing ring |
q | Replace when damaged. |
q | Before installation, slightly lubricate with clean engine oil. |
5 - | Injector (-N30-...N33) |
q | Resistance between valve contacts: 14... 17Ω. |
6 - | Sealing ring |
q | Observe installation position. |
q | Replace when damaged. |
7 - | Intake tubes |
q | Black. |
q | Fasten with spring braces. |
q | Ensure proper fastening. |
q | Of fuel filter. → Rep. Gr.20 |