| Fill the refrigerant gas loop with the Climate control recovery, recycling and refill set or EQ 7098 -VAS 6008- |
Note | t
| The working procedure may be subject to slight differences depending on which equipment is used. Therefore, it is necessary to observe the specific operating instructions for each equipment. |
| t
| Other available test equipment and tools may also be used, please refer to → Chapter. |
| l
| It is necessary to empty, that is, remove all air from the refrigerant gas loop, before filling it with refrigerant gas → Chapter. |
| l
| It is also necessary to remove all humidity from the loop if it has remained open for longer than would be required for normal assembly work. |
| l
| All notes related to the operation of the climate control recovery, recycling and refill set or EQ 7098 -VAS 6008- are included in the instructions manual for the respective equipment. |
|
|
|
