Volkswagen Workshop Service and Repair Manuals

Installation Installation is performed in reverse sequence to the removal, observing the following: –  Check the correct assembly position of the filtering element.

The filtering element -1- must be positioned on the right of the frame -2-.   WARNING Currently there are two distinct situations for the filter assembly, on the supply of parts. Situation 1:

The air filter is assembled on the assembly along with the frame and with the cover without guide pin, according to the illustrations below: Dust and pollen filter: 6Q0.820.367.B

Measurement A: 216 mm Filter frame: 6Q0.819.647

Measurement C: 220 mm Lid: 6Q0.819.422.B

Situation 2: Filter: 6R0.820.367 (pollen) / 6R0.819.653.B (charcoal)

Dimension B: 224 mm Lid: 6R1.819.422   Note Note that in order to use the 6R0.820.367 filter or the 6R0.819.653.B filter, it is necessary to use the 6R1.819.422 lid that has the lock pin -1-, so that it may prevent the displacement of the filter within the plenum chamber.   WARNING It is extremely important that the part numbers are used according to the respective situations. Non-conformity of this situation may cause faults in the system. There is a dimensional difference between the filters (dimensions „A“ and „B“), and the difference between the lids is illustrated in the detail -1- of the above illustration.