volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Natural air fanV2 - check > < Fresh air fanV2 (version 1) - remove and install

Polo Mk4

Fresh air fanV2 (version 2) - remove and install
Fresh air fan -V2- (version 2) - remove and install
Removal:
–  Remove the glove box → General body repairs, interior; Rep. gr.68.
–  Disconnect the connector -1-.
–  Carefully cut the cable fastenings.
   
–  Remove the fastening screws -arrows- and remove fan case.
  R80-10177
–  By using a small screwdriver, release carefully the locks -2- from the connector towards the -arrows- and push connector -1- downwards.
–  Press locks -3- with a screwdriver inwards and downwards.
–  Remove the Natural air fan -V2- from fan case.
Installation:
Installation is performed in reverse sequence to the removal, observing the following:
t  The Natural air fan -V2- is different for the heater and air conditioning equipment - check the part number.
t  The connector shall be connected correctly.
t  Tighten fastening screws to a torque of (1 Nm).
t  Locks -3- must leave completely the fan case.
t  Check fan operation before installing fan case → Chapter.
  R80-10178

Natural air fanV2 - check > < Fresh air fanV2 (version 1) - remove and install