volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Clutch pedal - remove install > < Clutch pedal support - remove and install|Removal

Polo Mk4

Installation
Installation
Installation is performed in the reverse sequence to the removal, observing the following:
   
–  The housing -A- shall be on the transmitting cylinder stem on the clutch hydraulic drive -B-.
–  Press clutch pedal -arrow- to fit the drive stem, make sure the fitting is OK.
–  Bleed the clutch system → Chapter.
–  Remove Clutch pedal switch - F36- → Fig.
  V30-0419

Clutch pedal - remove install > < Clutch pedal support - remove and install|Removal