volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Wheel roller bearing/wheel hub set in vehicles with brake drums - remove and install|Installation > < Wheel roller bearing/wheel hub set in vehicles with brake drums - remove and install

Polo Mk4

Removal
Removal
–  Lift the vehicle up to working height.
–  Remove the rear wheel.
   
–  Retract the brake.
–  Insert a screwdriver through the hole in the brake drum and press the adjustment wedge upwards.
–  Remove the fastening screw from the brake drum and remove the brake drum.
  R42-10057
–  Remove the dust protection cover from the fitting by tapping lightly on the punch claw with the Hub nut protector extractor -VW 637/2-.
  R42-10052
–  Remove the protection cover.
–  Remove the grooved nut (dodecagonal).
–  Remove the wheel hub/wheel roller bearing unit from the shaft tip.
  R42-10053

Wheel roller bearing/wheel hub set in vehicles with brake drums - remove and install|Installation > < Wheel roller bearing/wheel hub set in vehicles with brake drums - remove and install