Note t
| The motor/pump set must not be repaired |
t
| For complaints, determine the cause with the help of pressure
and tightness tests along with self-diagnosis |
t
| If a fault is determined, replace the motor/pump set |
t
| Residual hydraulic fluid remains on the motor/pump set, as
well as on the pressure and return hoses, after the fluid is drained |
t
| Do not reuse drained hydraulic oil |
t
| The pressure and return hoses must not be tightened using,
for example, the Clamps (diam. 25 mm) -3094- or other tools. Tightening may damage the pressure and return hoses |
t
| A bending radius of less than 100 mm must be avoided when bending
or placing pressure on return and pressure pipes/hoses, so as to prevent
damage |
|
|
|