Running gearChecking conditions:
| l
| Check the suspension, wheel roller bearings, steering wheel
and connecting rods of the steering wheel for excessive play and damages |
| l
| The tire notch depth should not have a difference exceeding
2 mm on an axle |
| l
| Tire filling pressure as prescribed |
| The fuel tank must be full |
| The spare wheel and tools are in their respective assembly
positions in the vehicle |
| The water reservoir for the windscreen/headlight washer system
must be full |
| l
| Make sure that the rotary plates and moving supports are not
in the final stop (buffer) during the measurement. |
| l
| The alignment machine must be properly assembled and adjusted
to the vehicle; follow the equipment operation instructions manual. |
| l
| Request training from your aligner manufacturer, if necessary. |
| l
| The platform and the axle measurement machine/computer can,
throughout time, deviate from the initial leveling/adjustment. |
| l
| The platform and the axle measurement machine/computer must
be gauged and, if necessary, adjusted at least once a year. |
| l
| Handle these highly sensitive units carefully and conscientiously! |
|
|
|
01 Steering & suspension
