volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Specifications valid for all engines on vehicles in "zero" transverse tilting position. > < Nominal values for vehicle alignment
Specifications valid for all engines.
Specifications valid for all engines.
t  Explanations related to the PR numbers → Anchor
Nominal values for the front axle
   
PR numbersG09G09 / G10G11 / G16G32 (Bluemotion)
Running gear13"14" / 15"13"14" / 15"14"
SteeringMechanicalHydraulicMechanicalHydraulicHydraulic
Total convergence (without compression)10' ± 10′ 10' ± 10′ 10' ± 10′ 10' ± 10′ 10' ± 10′
Difference of the convergence angle with steering wheel turning of 20° to the left and to the right55′ ± 20′1° 30′ ± 20′53′ ± 20′1° 28′ ± 20′1° 29′ ± 20′
Camber (in straight line position)-28′ ± 30′-28′ ± 30′-15′ ± 30′-15′ ± 30′-23′ ± 30′
Maximum difference admissible between the left and right sides (Camber)max. 30′max. 30′max. 30′max. 30′max. 30′
Caster (not adjustable)+2° 55′ ± 30′+4° 28′ ± 30′+2° 42′ ± 30′+4° 14′ ± 30′+4° 24′ ± 30′
Maximum difference admissible between the left and right sides (Caster)max. 30′max. 30′max. 30′max. 30′max. 30′

Nominal values for the rear axle
   
PR numbersG09G09 / G10G11 / G16G32 (Bluemotion)
Running gear13"14" / 15"13"14" / 15"14"
SteeringMechanicalHydraulicMechanicalHydraulicHydraulic
Camber-1° 30′ ± 20′-1° 30′ ± 20′-1° 30′ ± 20′-1° 30′ ± 20′- 1° 30′ ± 20′
Maximum difference admissible between the left and right sides (Camber)max. 20'max. 20'max. 20'max. 20′max. 20'
Total convergence+21′ ± 10′+21′ ± 10′+16′ ± 10′+16′ ± 10′+20′ ± 10′
Geometric axle (maximum movement of the traveling angle)max. 20′max. 20′max. 20′max. 20′max. 20′

   

Specifications valid for all engines on vehicles in "zero" transverse tilting position. > < Nominal values for vehicle alignment