Anti-theft alarm system - activate and deactivate |
Activate the anti-theft alarm system: |
The anti-theft alarm system turns on automatically when the
vehicle is locked. |
Note Before locking the vehicle, you must close completely all windows
and doors, in order to prevent unnecessary alarm triggering. However,
this is not necessary in vehicles with one-touch closing. |
Deactivate the anti-theft alarm system through
the manual command: |
t
| The anti-theft alarm system deactivates if the vehicle is unlocked
through activation of the unlocking key, or when the ignition is turned
on. |
Open the vehicle with key (emergency opening): |
t
| Turn the key in the driver's door lock to the opening
position. |
t
| Open only the driver's door. |
Note Therefore, you must not open any other door, bonnet or rear
lid; otherwise, the alarm will be triggered. |
However, the anti-theft alarm system remains activated, but
there is no alarm triggering. |
–
| Turn the ignition on within 15 seconds. |
After 15 seconds, the alarm will be triggered if the ignition
is not turned on. |
When the ignition is turned on, the electronic system recognizes
the valid ignition key and deactivates the anti-theft alarm system. |
|
|
|