volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Dashboard switches - remove and install|Installation > < Dashboard switches - remove and install

Polo Mk4

Removal
Removal
  Note
t  The switches must be removed from the dashboard with the wiring connected; later, it will be disconnected.
t  The covers, which are installed according to each type of vehicle, can be levered carefully from outside with a Scraper -VW 037- or a screwdriver, without the need to remove the radio.
–  Turn off the ignition and all electrical equipment, and remove the key from ignition.
–  Disconnect the Battery -A- → Chapter.
–  Remove the radio → Communication; Rep. gr.91.
   
–  Press the switch -1- and the Seat heating switch -E73--2- from inside the control panel.
–  Unlock the connection and remove from switch -1-.
  N96-0318

Dashboard switches - remove and install|Installation > < Dashboard switches - remove and install