volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Left headlight beam reach control motor V48 and/or Right headlight beam reach control motorV49 (Manufacturer - automotiv lighti|Installation > < Left headlight beam reach control motor V48 and/or Right headlight beam reach control motorV49 (Manufacturer - automotiv lighti

Polo Mk4

Removal
Removal
–  Turn off the ignition and all electrical equipment, and remove the key from ignition.
–  Remove the main headlight → Chapter.
–  Make sure that the headlight is manufactured by „AL“.
–  Lay the headlight with the plastic cover facing down in a clean and smooth base, because, if there is no protection for the headlight cover, it may be easily scratched.
–  Install in the Electric adhesive cutter - glued glasses -VAG 1561A- the Knife -V.A.G 1561/18-.
   
–  Cut the headlight control motor lid near the lower corner -arrow-.
–  Grind the sawed corner and remove the residues from the headlight compartment sawing process.
  N94-0648
–  Remove the cover and remove the connector from the control motor -arrow-.
  N94-0649

Left headlight beam reach control motor V48 and/or Right headlight beam reach control motorV49 (Manufacturer - automotiv lighti|Installation > < Left headlight beam reach control motor V48 and/or Right headlight beam reach control motorV49 (Manufacturer - automotiv lighti