Volkswagen Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Windscreen wiper blade resting position - adjust >
< Windscreen wiper motorV - disassemble and assemble|Disassembly
Polo Mk4
Vehicle electrics
Electrical system
Windscreen wipe/wash system / Windscreen wiper system / ndscreen_wiper_motorv_disassembleand_assemble/">Windscreen wiper motorV - disassemble and assemble
Assembly
Assembly
Assembly
Assembly is performed in the reverse order to disassembly, observing the following:
Note
Set the windscreen wiper motor -V- in its rest position.
–
Connect the Battery -A-
→ Chapter
.
–
Connect the Windscreen wiper motor -V- connector and operate the mechanism for a few seconds.
–
Place the Windscreen wiper motor -V- in the respective mechanism and fasten with the fastening screws
-1-
(7 Nm).
–
Tighten the fastening screws to the specified torque
→ Chapter
.
–
Turn the Windscreen wiper motor -V- on until it stops at the resting position.
–
With the handle
-3-
loosened, first tighten the articulated rod
-2-
and then the articulated rod
-1-
.
–
Align the articulated rods
-1 and 2-
according to the centre line indicated in the figure.
–
Tighten the securing nut for the crank
-4-
to (18 Nm).
Vehicle electrics
Electrical system
Windscreen wipe/wash system / Windscreen wiper system / ndscreen_wiper_motorv_disassembleand_assemble/">Windscreen wiper motorV - disassemble and assemble
Assembly
Windscreen wiper blade resting position - adjust >
< Windscreen wiper motorV - disassemble and assemble|Disassembly