–
| Disengage connector -1- and loosen nuts -arrows- that fasten the Interactive System control
unit -J879-. |
–
| Remove the Interactive System control unit -J879--2 -. |
Installation is performed in reverse sequence to that of removal,
observing the following: |
Note t
| After installing the new Interactive System control
unit -J879-, it is necessary to code it. |
t
| For coding, use theVehicle diagnostic, testing and
information system -VAS 5051- or the Vehicle
diagnosis and technical information system -VAS 5052- or later equipment → General information; Rep. gr.97 |
|
|
|