Polo Mk5
| Moving to service position |
| – | Remove front bumper cover → Chapter. |
| – | Detach Bowden cable at lock carrier → Chapter. |
| – | If vehicle has a charge air cooler, detach the pressure hoses → Engine; Rep. gr.21 |
| – | Support bonnet with suitable workshop equipment. |
| – | Remove bolts -4- on left and right sides. |
| – | Remove bolts -5- on left and right side of longitudinal members. |
| – | Screw in guide pins -3411- on left and right side of longitudinal member. |
| – | Unscrew bolts -3- on left and right from upper part of retaining brackets -2-. |
| – | The lock carrier -1- can be pulled forwards -arrows- about 10 cm on the guide pins -3411-. |
