Polo Mk5
| Removing and installing |
| Removing |
| – | Pull release lever -1- to release bonnet. |
| – | Insert a small screwdriver in gap between release lever -1- and retaining clip -2-. |
| – | Lever retaining clip -2- out of release lever -1--arrow- and pull release lever off mounting bracket -3-. |
| For all other work on mounting bracket -3-, remove lower A-pillar trim -4-. |
| Installing |
| l | Lower A-pillar trim -4- is installed. |
| – | Push retaining clip -2- into release lever. |
| – | Press retaining lever -1- onto mounting bracket -3-. |
